Category: NGCA
NVIDIA GRID Community Advisors
-
By Tony in Deep Learning, GPU, Horizon, HPC, Large Scale Compute, Machine Learning, NGCA, PowerCLI, Programming, vExpert
-
March 13, 2019
Over the weekend I finished writing a PowerCLI script to do VDI by day and compute by night. In in this post I’m going to share the script and how to set it up with you.
For those not familiar with the term VDI by day and compute by night here is my vision for it. Let’s say you have a bunch of VDI users who are structural engineers. They typically work from 8 in the morning to 5 or so at night. On their VDI desktops they have programs like like AutoCAD which require high end GPUs, but since they are using VDI they’re virtual GPUs or vGPUs. That means you have these high end GPUs that might be sitting idle for 12 to 16 hours a day and the organization spent a lot of money for those GPUs.
Now what if you could use those GPUs for something other than just engineers virtual desktops? You know, get a little more millage out of them. The R&D department keeps wanting more servers for their high performance computing (HPC) farm… What could 12 extra hours a day of GPU time coming from the Engineers idle VDI hosts do to help them?
Permanent link to this article: https://www.wondernerd.net/scripting-vdi-by-day-and-compute-by-night/
Today the 2019 NVIDIA vGPU Community Advisors (NGCA) was announced. I am pleased to share that I have been selected to join this wonderful group again for another year.
Permanent link to this article: https://www.wondernerd.net/2019-nvidia-vgpu-community-advisors/
I’m a noob when it comes to PowerCLI, I can Get-VM like most everyone else, but not much more. You may have seen my previous post about Taking Back Resources where I talked about the theory and logic behind vGPU cycle harvesting. Right now I’m working on putting it into action and the best way …
Continue reading
Permanent link to this article: https://www.wondernerd.net/vgpu-powercli-commands/
-
By Tony in AI, CUDA, Deep Learning, GPU, Horizon, HPC, Large Scale Compute, Machine Learning, NGCA, vExpert
-
September 14, 2018
In this post I’m looking at reclaiming resources from virtual environments. To which you might be saying that’s simple, VMware put out a white paper on cycle harvesting. https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/solutions/vmware-jackson-national-life-insurance-white-paper.pdf The above paper was based on what a VMware customer did to reclaim idle CPU resources from their VDI environment. They did this by setting share …
Continue reading
Permanent link to this article: https://www.wondernerd.net/taking-back-resources/
Thank you to everyone who was able to attend our session at VMworld! And an even bigger thanks to those visiting who weren’t able to attend in person. Gina and I want to make sure you have the resources you need to understand how you can gain a competitive advantage by virtualizing your AI/ML/DL/ and …
Continue reading
Permanent link to this article: https://www.wondernerd.net/vap2340bu/
At GTC18 I mentioned that I created a script to run through all the samples in the CUDA Toolkit. I had a few moments so I thought I’d share the code. You can use the code below to loop through the sample files. If you are interested in the results I obtained on VMs with …
Continue reading
Permanent link to this article: https://www.wondernerd.net/cuda-toolkit-test-script/
GTC 2018 concluded on Thursday afternoon and this post took me a bit longer than planned. It’s time for my now annual GTC wrap up post. In this post I share my thoughts, opinions, and personal experience on this years conference. This is my 3rd year attending GTC and it’s amazing how much has changed …
Continue reading
Permanent link to this article: https://www.wondernerd.net/gtc18-wrap-up/
Thank you to everyone who attended session S8483, Empowering CUDA Developers with Virtual Desktops, at GTC. Below are the links provided in the session today. If you have questions or need additional resources please contact me or leave a message in the comment section below. The items below that begin with a ‘/’ are shortened …
Continue reading
Permanent link to this article: https://www.wondernerd.net/gtc18-session-s8483-links/
Thank you to all attendees who started GTC18 at this session. I hope it was helpful for you. When recordings are available I will add them to this post as well. For your enjoyment, here are the slides from my GTC18 session, S8483, Empowering CUDA Developers with Virtual Desktops. If you are interested in the …
Continue reading
Permanent link to this article: https://www.wondernerd.net/gtc18-session-s8483/
Do you need another reason to attend the GPU Tech Conference this March? How about this… I’ll be there and I’ll be presenting on something I’m sure you want to know about. I’ll be presenting session is S8483, “Empowering CUDA Developers with Virtual Desktops.” (I’ll update the post when the time and day are scheduled, …
Continue reading
Permanent link to this article: https://www.wondernerd.net/join-me-at-gtc18/
